Description

Guardian G1778 Wall Mounted Eye/Face Wash

---

Application: AutoFlowâ„¢ eye/face wash for mounting on wall. Spray heads swing down from storage to operational position, activating water flow. Available in a variety of spray head configurations to minimize obstructions at a sink. Note: If unit is not installed at a sink, floor drain should be provided underneath unit to prevent accumulation of water on floor.

---

Spray Head Assembly: Two FS-Plus™ spray heads. Each head has a “flip top” dust cover, internal flow control and filter to remove impurities from the water flow.

---

Valve: 1/2″ IPS plug-type valve with Teflon® coated

---

O-ring seals. Swinging head assembly down from storage to operational position opens orifice and activates water flow. Unit remains in operation until spray head assembly is returned to storage position.

---

Strainer: Unit is furnished with in-line strainer to protect valve and spray heads from debris in water line.

---

Construction: Polished chrome plated brass.

---

Supply: 1/2″ NPT female union inlet.

---

Sign: ANSI-compliant identification sign.

---

Quality Assurance: Unit is completely assembled and water tested prior to shipment.

---

Available Option

• TMV G3600LF thermostatic mixing valve precisely blends hot and cold water to deliver warm (tepid) water as provided by ANSI Z358.1 – 2014. Refer to Tempering Units section for complete technical and product selection information.