Description

• Product
• Technical Specification
• Warranty Details

• Product Number: YBX3078

  Vehicles with demanding electrical loads require a battery that delivers reliable cranking power and stable current supply across a wide range of operating conditions. The Yuasa YBX3078 is a 12V 60Ah sealed maintenance-free (SMF) car battery from the YBX3000 series, engineered to meet the requirements of modern passenger cars with conventional starting systems. Manufactured by Yuasa, a globally recognised authority in lead-acid battery technology, the YBX3000 range employs sealed AGM-influenced SMF construction that resists electrolyte spillage and withstands vibration encountered on rough or uneven terrain. High power density supports rapid engine starts and a stable supply to lighting circuits and vehicle accessories. The sealed cell design minimises water loss (rated W3) and reduces self-discharge during storage, helping to maintain charge retention between infrequent use cycles. A state-of-charge indicator provides a quick visual reference of battery condition. The YBX3078 is rated at 550A Cold Cranking Amps (EN) with a 20-hour capacity of 62Ah. Physical dimensions are 243mm x- 175mm – 190mm (L x- W x- H), with a mean weight of 14.8kg with acid. The case is L2, hold-down type B3, and terminal layout is T1 with polarity 1 (positive on the left). Handles and end-venting are included. Recommended charge rate is 4A. No direct cross-reference codes are held on record; buyers should verify fitment against their vehicle handbook. Start-stop compatibility is not confirmed – refer to the product label. The YBX3078 is one of ten variants within the YBX3000 SMF range available on this listing, including YBX3005, YBX3053, YBX3054, YBX3055, YBX3057, YBX3075, YBX3214, YBX3012, YBX3014, and YBX3027, covering a broad spread of vehicle applications.” This battery is supplied with a 3-year manufacturer’s warranty. ” . Yuasa YBX3078 SMF CAR BATTERY 12V 60AH is a Yuasa YTX/YTZ AGM Powersports Battery engineered to deliver dependable power, long service life, and proven reliability across demanding applications. It pairs robust capacity with durable plate design to support frequent duty cycles and everyday use. The range reflects Yuasa’s OE heritage, combining strict quality control with user-€˜friendly, maintenance-€˜saving construction for consistent results. Built to Yuasa standards, it offers consistent output, durable construction, and low maintenance demands. Built to Yuasa standards, it offers consistent output, durable construction, and low maintenance demands. Key Feature: Sealed AGM construction resists spills and vibration, enabling confident use on rough terrain. High power density supports quick starts and stable supply for lights and accessories. Low self-€˜discharge maintains charge during storage periods and intermittent seasonal use. Robust grid alloy helps resist corrosion and extends service life in tough conditions. Ready-€˜to-€˜install convenience reduces setup time and simplifies maintenance requirements. Compact case sizing improves fitment in tight compartments on motorcycles and ATVs. Covered by a 3-year warranty for reliable use and worry-free ownership. Compatibility: Compatible with motorcycles, scooters, ATVs and UTVs requiring compact, vibration-€˜resistant starting power. Designed for dependable service life across typical operating Uses: Deliver reliable engine starting and stable electrical support for lights, instrumentation and auxiliary accessories. Provide vibration-€˜resistant power on rough terrain, supporting safety systems and continuous riding performance. Maintain charge during off-€˜season storage, enabling quick readiness and dependable restarts after lay-€˜ups. Support frequent short trips with consistent voltage output and strong recharge acceptance between rides. Withstand temperature swings while sustaining cranking performance and electrical stability across conditions. About MachineRefurb: MachineRefurb is an e-commerce platform specialising in replacement parts, spares and consumables for construction, agriculture and industrial machinery, serving customers across Ireland, the United Kingdom and Europe. We offer an extensive catalogue of over 200,000 products to keep your machines running. Standard delivery: 1-7 working days across Ireland, the UK and Europe. Fitment Warning: Always confirm physical dimensions, terminal type, post orientation (polarity), voltage, capacity and CCA against the OEM specification before installation. Incorrect fitment can damage the vehicle/equipment and void warranties. Use an approved charger and follow Yuasa/GS Yuasa safety guidance.

• • Brand:Yuasa
  • Voltage : 12V
  • Capacity at 20-hour Rate (Ah) : 62
  • Cold Cranking Performance (Amps) EN1 : 550
  • L x- W x- H: 243mm x- 175mm x- 190mm
  • Mean Weight with Acid (kg) : 14.8
  • Cell Layout : 1
  • Terminal Type : T1
  • Case Type : L2
  • Recommended Charge Rate (Amps) : 4
  • Handles : Yes
  • End-Venting : Yes
  • State of Charge Indicator : Yes
  • Water Loss : W3
  • Charge Retention : C2
  • Vibration : V2
  • Endurance : E1
  • Capacity Ah (20-HR) : 62
  • Length (mm) : 243
  • Width (mm) : 175
  • Height (mm) : 190
  • NCC Class : N/A
  • Hold Down : B3
• New Grade – 3 Year Warranty from purchase is available on this product.